IEC 0.6/1KV XLPE Insulation Steel Wire Armoured (SWA) Power Cable

Buod

Mga Aplikasyon

Maaaring gamitin para sa permanenteng instalasyon sa loob at labas ng gusali sa mga duct ng kable o nang direkta sa lupa.

Ang mga kable na ito ay may mekanikal na proteksyon at samakatuwid ay angkop para sa labas ng paggamit, direktang paglilibing, at mga lugar kung saan inaasahan ang biglang mekanikal na stress.

Mga Tampok

Working temperature:

• Max. temperatura ng conductor sa normal na operasyon: 90℃

• Max. temperatura ng conductor sa maikling circuit (Max. 5 segundo haba): 250℃

• Boltahe:

• AC 0.6/1KV

• Boltahe ng pagsusulit:

• AC 3.5KV para sa 5 minuto, hindi nasira

• Min. Radius ng Pagbaluktot:

• 1.5mm2 hanggang 16mm2 – Nakapirmi: 6 x kabuuang diameter

• 25mm2 at mas mataas – Nakapirmi: 8 x kabuuang diam

Pamantayan

IEC60502-1, BS5467

Mga Spesipikasyon

Low voltage

Temperatura sa Pagtratrabaho 90℃

Mga single core cable

8120 mm2	Min. Mga strand ng conductor	Insulation Kapal mm	Pananloob na baluti Kapal mm	Diyametro ng armadura wire mm	Outer-sheath Kapal mm	Tiyak na Diametro ng cable mm	Max. DC resistance sa 20C(0Acm)
1x1.5	7	0.7	1.0	0.80	1.8	11.1	12.1
1x2.5	7	0.7	1.0	0.80	1.8	11.5	7.41
1X4.0	7	0.7	1.0	0.80	1.8	12.1	4.61
1X6.0	7	0.7	1.0	0.80	1.8	12.6	3.08
1x10	7	0.7	1.0	0.80	1.8	13.4	1.83
1x16	7	0.7	1.0	0.80	1.8	14.4	1.15
1x25	7	0.9	1.0	0.80	1.8	16.0	0.727
1X35	7	0.9	1.0	0.80	1.8	17.0	0.524
1x50	7	1.0	1.0	125	1.8	19.4	0.387
1X70	12	1.1	1.0	125	1.8	21.3	0268
1X95	15	1.1	1.0	1.25	1.8	22.9	0.193
1X120	18	12	1.0	1.60	1.8	25.2	0.153
1X150	18	1.4	1.0	1.60	1.8	27.2	0.124
1X185	30	1.6	1.0	1.60	1.8	29.2	0.0991
1X240	34	1.7	1.0	1.60	1.9	31.8	0.0754
1X300	34	1.8	1.0	1.60	1.9	34.2	0.0601
1X400	53	2.0	12	2.00	2.1	39.4	0.0470
1X500	53	2.2	12	2.00	2.2	42.7	0.0366
1X630	53	2.4	1.2	2.00	2.3	46.8	0.0283

mga kable ng 2 cores

Sukat mm2	NHn. Mga sinulid ng conductor	Insulation Kapal mm	Inner-sheath Kapal mm	Dlamotor ng armadong kawad mm	Outer-sheath Kapal	Tiyak na Diametro ng cable mm	Max. DC resistensiya sa 20C(QJkm)
2x1.5	7	0.7	1.0	0.80	1.8	14.5	12.1
2x2.5	7	0.7	1.0	0.80	1.8	15.4	7.41
2X4.0	7	0.7	1.0	0.80	1.8	16.5	4.61
2X6.0	7	0.7	1.0	0.80	1.8	17.6	3.08
2x10	7	0.7	1.0	1.25	1.8	19.9	1.83
2x16	7	0.7	1.0	125	1.8	21.9	1.15
2x25	7	0.9	1.0	1.60	1.8	25.8	0.727
2X35	7	0.9	1.0	1.60	1.8	24.7	0.524
2x50	7	1.0	1.0	1.60	1.8	27.3	0.387
2X70	12	1.1	1.0	1.60	2.0	30.2	0.268
2X95	15	1.1	1.2	2.00	2.1	35.0	0.193
2X120	18	1.2	1.2	2.00	2.2	37.5	0.153
2X150	18	1.4	1.2	2.00	2.3	40.9	0.124
2X185	30	1.6	1.4	2.50	2.5	45.8	0.0991
2X240	34	1.7	1.4	2.50	2.7	50.0	0.0754
2X300	34	1.8	1.6	2.50	2.8	54.4	0.0601
2X400	53	2.A	1.6	2.50	3.1	60. 0	0.0470

mga kable ng 3 cores

Sukat mm2	Min. Mga strand ng conductor	Insulation Kapal mm	Inner-sheath Kapal mm	Diyametro ng armadong kawad mm	Outer-sheath Kapal mm	Tiyak na Diametro ng cable mm	Max. DC resistensiya sa 20c (Qikm)
3X1.5	7	0.7	1.0	0.80	1.8	15.0	12.1
3x2.5	7	0.7	1.0	0.80	1.8	15.9	7.41
3X4.0	7	0.7	1.0	0.80	1.8	17.1	4.61
3X6.0	7	0.7	1.0	0.80	1.8	18.3	3.08
3X10	7	0.7	1.0	125	1.8	20.8	1.83
3X16	7	0.7	1.0	1.25	1.8	22.9	1.15
3x25	7	0.9	1.0	1.60	1.8	27.1	0.727
3X35	7	0.9	1.0	1.60	1.8	28.1	0.524
3x50	7	1.0	1.0	1.60	1.9	31.9	0.387
3X70	12	1.1	12	2.00	2.0	36.5	0.268
3X95	15	1.1	12	2.00	2.2	40.5	0.193
3X120	18	12	12	2.00	2.3	43.4	0.153
3X150	18	1.4	1.4	2.50	2.5	49.0	0.124
3X185	30	1.6	1.4	2.50	2.6	53.2	0.0991
3X240	34	1.7	1.6	2.50	2.8	58.6	0.0754
3x300	34	1.8	1.6	2.50	3.0	63.8	0.0601
3X400	53	2.0	1.6	2.50	3.2	70.1	0.0470

4 na core ng kable

Sukat mm2	Min. Mga strand ng conductor	Insulation Kapal mm	Inner-sheath Kapal mm	Diyametro ng armadong kawad mm	Outer-shMth Kapal mm	Tiyak na Diametro ng cable mm	Max. DC resistensiya sa 20C(QAm)
4X1.5	7	0.7	1.0	0.80	1.8	15.7	12.1
4X2.5	7	0.7	1.0	0.80	1.8	16.8	7.41
4X4.0	7	0.7	1.0	0.80	1.8	18.1	4.61
4X6.0	7	0.7	1.0	1.25	1.8	20.3	3.08
4x10	7	0.7	1.0	1.25	1.8	22.1	1.83
4X16	7	0.7	1.0	1.60	1.8	25.2	1.15
4x25	7	0.9	1.0	1.60	1.8	29.1	0.727
4X35	7	0.9	1.0	1.60	1.9	31.5	0.524
4x50	7	1.0	1.0	1.60	2.0	35.5	0.387
4X70	12	1.1	12	2.00	2.2	40.4	0.268
4X95	15	1.1	12	2.00	2.3	45.1	0.193
4X120	18	1.2	1.4	2.50	2.5	50.2	0.153
4X150	18	1.4	1.4	2.50	2.6	54.6	0.124
4X185	30	1.6	1.4	2.50	2.8	59.7	0.0991
4X240	34	1.7	1.6	2.50	3.0	66.1	0.0754
4X300	34	1.8	1.6	2.50	3.2	71.8	0.0601
4X400	53	2.0	1.8	3.15	3.5	81.0	0.0470

mga kable na may 5 cores

Sukat mm2	Min. Mga strand ng conductor	Insulation Kapal mm	Inner-sheath Kapal mm	Diyametro ng armour wire mtn	Outer-sheath Kapal mm	Tiyak na Diametor ng cabtemm	Max. DC resistance sa 20C(0Am)
5X1.5	7	0.7	1.0	0.80	1.8	16.6	12.1
5X2.5	7	0.7	1.0	0.80	1.8	17.8	7.41
5X4.0	7	0.7	1.0	1.25	1.8	20.1	4.61
5X6.0	7	0.7	1.0	125	1.8	21.6	3.08
5x10	7	0.7	1.0	125	1.8	23.6	1.83
5X16	7	0.7	1.0	1.60	1.8	27.0	1.15
5x25	7	0.9	1.0	1.60	1.8	31.8	0.727
5X35	7	0.9	1.0	1.60	1.9	34.7	0.524
5x50	7	1.0	1.0	2.00	2.1	39.8	0.387
5X70	12	1.1	12	2.00	2.3	44.0	0268
5X95	15	1.1	1.2	2.50	2.4	50.7	0.193
5X120	18	12	1.4	2.50	2.6	54.9	0.153
5X150	18	1.4	1.4	2.50	2.8	59.9	0.124
5X185	30	1.6	1.4	2.50	3.0	65.9	0.0991
5X240	34	1.7	1.6	2.50	3.2	72.4	0.0754
5X300	34	1.8	1.6	3.15	3.4	80.6	0.0601
5X400	53	2.0	1.8	3.15	3.8	90.2	0.0470

3+1 core ng kable

Sukat mm2	Mln. Strands ng conductor	Insulation Kapal mm	pantaya	Diyametro ng armadong kawad mm	Outer-sheath Kapal mm	Tiyak na Diametro ng cable mm	Max. DC resistance at 20c (Q/km)
3X4.0+1X2.5	7/7	0.7/0.7	1.0	0.80	1.8	16.5	7.41/12.1
3X4.0+1X2.5	7/7	0.7/0.7	1.0	0.80	1.8	17.8	4.61/7.41
3X6.0+1X4	7/7	0.7/0.7	1.0	1.25	1.8	20.0	3.08/4.61
3X10+1X6	7/7	07/0.7	1.0	125	1.8	21.7	1.83/3.08
3X16+1X10	7/7	0.7/0.7	1.0	1.25	1.8	23.9	1.15/1.83
3X25+1X16	7/7	0.9/0.7	1.0	1.60	1.8	28.1	0.727/1.15
3X35+1X16	7/7	0.9/0.7	1.0	1.60	1.8	29.8	0.524/0.727
3X50+1X25	7/7	1.0/0.9	1.0	1.60	1.9	34.0	0.387/0.727
3X70+1X35	12/7	1.1/0.9	1.2	2.00	2.1	38.8	0.268/0.524
3X95+1X50	15/12	1.1/1.0	1.2	2.00	2.2	43.2	0.193/0.387
3X120+1X70	18/12	1.2/1.1	1.2	2.00	2.4	46.8	0.153/0.268
3X150+1X70	18/12	1.4/1.1	1.4	2.50	2.5	52.6	0.124/0268
3X185+1X95	30/15	1.6/1.1	1.4	2.50	2.7	56.9	0.0991/0.193
3X240+1X120	34/18	1.7/1.2	1.6	2.50	2.9	63.2	0.0754/0.153
3X300+1X150	34/18	1.8/1.4	1.6	2.50	3.0	68.7	0.0991/0.193
3X400+1X185	53/30	2.0/1.6	1.6	3.15	33	79.0	0.0754/0.153

3+2 core ng kable

Sukat mm2	Mln. Strands ng conductor	InsuiMton Kapal mm	Inner-sheath Kapal mm	Diametor ng armadong kawad mm	Outer-sheath Kapal mm	Tiyak na Diametro o! cable mm	Max. DC resistensiya sa 20C (a/km)
3X2.5+2X1.5	7/7	0.7/0.7	1.0	0.80	1.8	17.3	7.41/12.1
3X4.0+2X2.5	7/7	0.7/0.7	1.0	1.25	1.8	19.5	4.61/7.41
3X6.0+2X4	7/7	0.7/0.7	1.0	125	1.8	21.0	3.08/4.61
3X10+2X6	7/7	07/0.7	1.0	125	1.8	22.8	1.83/3.08
3X16+2X10	7/7	0.7/0.7	1.0	1.60	1.8	25.9	1.15/1.83
3X25+2X16	7/7	0.9/0.7	1.0	1.60	1.8	29.6	0.727/1.15
3X35+2X16	7/7	0.9/0.7	1.0	1.60	1.8	31.7	0.524/0.727
3X50+2X25	7/7	1.0/0.9	1.0	1.60	2.0	37.4	0.387/0.727
3X70+2X35	12/7	1.1/0.9	1.2	2.00	2.1	42.6	0.268/0.524
3X95+2X50	15/12	1.1/1.0	1.2	2.00	2.3	47.6	0.193/0.387
3X120+2X70	18/12	12/1.1	1.4	2.50	2.5	53.2	0.153/0.268
3X150+2X70	18/12	1.4/1.1	1.4	2.50	2.6	57.6	0.124/0.268
3X185+2X95	30/15	1.6/1.1	1.4	2.50	2.8	63.0	0.0991/0.193
3X240+2X120	34/18	1.7/1.2	1.6	2.50	3.0	69.7	0.0754/0.153
3X300+2X150	34/18	1.8/1.4	1.6	2.50	32	76.0	0.0601/0.124
3X400+2X185	53/30	2.0/1.6	1.8	3.15	3.5	86.5	0.0470/0.0991

4+1 cores cables

Sukat mm2	Mln. Strands of konduktor	Insulation Kapal mm	Inner^heath Kapal mm	Diyametro ng armadong kawad mm	Outer-sheath Kapal mm	Tiyak na Diametro ng cable mm	Max. DC resistiincQ at 20C(0/km)
4X25+1X1.5	sa	0.7/0.7	1.0	0.80	1.8	17.5	7.41/12.1
4X4.0+1X2.5	7/7	07/0.7	1.0	1.25	1.8	19.8	4.61/7.41
4X6.0+1X4	7/7	0.7/0.7	1.0	1.25	1.8	21.3	3.08/4.61
4X10+1X6	7/7	0.7/0.7	1.0	1.25	1.8	23.2	1.83/3.08
4X16+1X10	7Z7	0.7/0.7	1.0	1.60	1.8	26.4	1.15/1.83
4X25+1X16	7/7	0.9/0.7	1.0	1.60	1.8	30.9	0.727/1.15
4X35+1X16	7/7	0.9/0.7	1.0	1.60	1.9	33.3	0.524/0.727
4X50+1X25	7/7	1.0/0.9	1.2	2.00	2.1	38.8	0.387/0.727
4X70+1X35	12/7	1.1/0.9	1.2	2.00	22	42.8	0.268/0.524
4X95+1X50	15/12	1.1/1.0	1.2	2.00	2.4	47.8	0.193/0.387
4X120+1X70	18/12	1.2/1.1	1.4	2.50	2.5	53.2	0.153/0.268
4X150+1X70	18/12	1.4/1.1	1.4	2.50	2.7	57.8	0.124/0.268
4X185+1X95	30/15	1.6/1.1	1.6	2.50	2.9	63.6	0.0991/0.193
4X240+1X120	34/18	1.7/1.2	1.6	2.50	3.1	69.9	0.0754/0.153
4X300+1X150	34/18	1.8/1.4	1.6	3.15	3.3	77.5	0.0601/0.124
4X400+1X185	53/30	2.0/1.6	1.8	3.15	3.6	86.7	0.0470/0.0991