Dachaigh> Proiductan> Càbl Iomadh Ìmpich

IEC 0.6/1KV XLPE Insulation Steel Wire Armoured (SWA) Power Cable

Co-chùrsa

Feuchainnean

Feumaidh e airson suidheachaidh sìosach taobh a-staigh agus taobh a-muigh ann an cluasagan cabaill no dìreach anns an t-sìor.

Thèid an cabaill seo a chur an sàs cuideachd le pròiseactairean meacanaigeach agus mar sin tha iad den choisdeal airson feum air a-muigh, cur dìreach san t-sìor agus raointean far a bheil iomradh air meacanaigeach a bhith a' tachairt gu h-àraidh.

Naidheachdan

Teòirmpheileag:

• Max. teòthachd an t-sìolaidh le gnìomhachd choitcheann: 90℃

• Max. teòthachd an t-sìolaidh le cur air short (Max. 5s ùine): 250℃

• Voltage:

• AC 0.6/1KV

• Voltage de thurais:

• AC 3.5KV airson 5m, nach eacadh

• Min. Bending Radius:

• 1.5mm2 gu 16mm2 – Seadh: 6 x trast-thomhas iomlan

• 25mm2 agus suas – Seadh: 8 x trast-thomhas iomlan

Standaigean

IEC60502-1, BS5467

Speisficaisean

TOMADAS ÙR

Tèomaran Obrachaidh 90℃

Ciall aon-cheann

8120 mM2	Iomhaill. Sreathan de chonduidir	Tromadh Cruthachadh mm	Crios-dheaghaidh inntinn Cruthachadh mm	Trast-thomhas air a' chòir slatt mm	Sheath a-muigh Cruthachadh mm	Cir. Trastan de chabhlach mm	Uachdarach inbhe-dhiùbhail DC aig 20C (0Acm)
1X1.5	7	0.7	1.0	0.80	1.8	11.1	12.1
1X2.5	7	0.7	1.0	0.80	1.8	11.5	7.41
1X4.0	7	0.7	1.0	0.80	1.8	12.1	4.61
1X6.0	7	0.7	1.0	0.80	1.8	12.6	3.08
1X10	7	0.7	1.0	0.80	1.8	13.4	1.83
1X16	7	0.7	1.0	0.80	1.8	14.4	1.15
1X25	7	0.9	1.0	0.80	1.8	16.0	0.727
1X35	7	0.9	1.0	0.80	1.8	17.0	0.524
1X50	7	1.0	1.0	125	1.8	19.4	0.387
1X70	12	1.1	1.0	125	1.8	21.3	0268
1X95	15	1.1	1.0	1.25	1.8	22.9	0.193
1X120	18	12	1.0	1.60	1.8	25.2	0.153
1X150	18	1.4	1.0	1.60	1.8	27.2	0.124
1X185	30	1.6	1.0	1.60	1.8	29.2	0.0991
1X240	34	1.7	1.0	1.60	1.9	31.8	0.0754
1X300	34	1.8	1.0	1.60	1.9	34.2	0.0601
1X400	53	2.0	12	2.00	2.1	39.4	0.0470
1X500	53	2.2	12	2.00	2.2	42.7	0.0366
1X630	53	2.4	1.2	2.00	2.3	46.8	0.0283

2 cores cables

Meud mM2	NHn. Strands de chonduidir	Tromadh Cruthachadh mm	Bathais-sheath Cruthachadh mm	Dlamotor of armour wire mm	Sheath a-muigh Togalachd	Cir. Trastan de chabhlach mm	Max. DC resistance at 20C(QJkm)
2X1.5	7	0.7	1.0	0.80	1.8	14.5	12.1
2X2.5	7	0.7	1.0	0.80	1.8	15.4	7.41
2X4.0	7	0.7	1.0	0.80	1.8	16.5	4.61
2X6.0	7	0.7	1.0	0.80	1.8	17.6	3.08
2X10	7	0.7	1.0	1.25	1.8	19.9	1.83
2X16	7	0.7	1.0	125	1.8	21.9	1.15
2X25	7	0.9	1.0	1.60	1.8	25.8	0.727
2X35	7	0.9	1.0	1.60	1.8	24.7	0.524
2X50	7	1.0	1.0	1.60	1.8	27.3	0.387
2X70	12	1.1	1.0	1.60	2.0	30.2	0.268
2X95	15	1.1	1.2	2.00	2.1	35.0	0.193
2X120	18	1.2	1.2	2.00	2.2	37.5	0.153
2X150	18	1.4	1.2	2.00	2.3	40.9	0.124
2X185	30	1.6	1.4	2.50	2.5	45.8	0.0991
2X240	34	1.7	1.4	2.50	2.7	50.0	0.0754
2X300	34	1.8	1.6	2.50	2.8	54.4	0.0601
2X400	53	2.a	1.6	2.50	3.1	60. 0	0.0470

cablean 3 cores

Meud mM2	Iomhaill. Sreathan de chonduidir	Tromadh Cruthachadh mm	Bathais-sheath Cruthachadh mm	Diamatir de armour wire mm	Sheath a-muigh Cruthachadh mm	Cir. Trastan de chabhlach mm	Max. DC inneart aig 20c (Qikm)
3X1.5	7	0.7	1.0	0.80	1.8	15.0	12.1
3X2.5	7	0.7	1.0	0.80	1.8	15.9	7.41
3X4.0	7	0.7	1.0	0.80	1.8	17.1	4.61
3X6.0	7	0.7	1.0	0.80	1.8	18.3	3.08
3X10	7	0.7	1.0	125	1.8	20.8	1.83
3X16	7	0.7	1.0	1.25	1.8	22.9	1.15
3X25	7	0.9	1.0	1.60	1.8	27.1	0.727
3X35	7	0.9	1.0	1.60	1.8	28.1	0.524
3X50	7	1.0	1.0	1.60	1.9	31.9	0.387
3X70	12	1.1	12	2.00	2.0	36.5	0.268
3X95	15	1.1	12	2.00	2.2	40.5	0.193
3X120	18	12	12	2.00	2.3	43.4	0.153
3X150	18	1.4	1.4	2.50	2.5	49.0	0.124
3X185	30	1.6	1.4	2.50	2.6	53.2	0.0991
3X240	34	1.7	1.6	2.50	2.8	58.6	0.0754
3X300	34	1.8	1.6	2.50	3.0	63.8	0.0601
3X400	53	2.0	1.6	2.50	3.2	70.1	0.0470

càballan ceithir chòrd

Meud mM2	Iomhaill. Sreathan de chonduidir	Tromadh Cruthachadh mm	Bathais-sheath Cruthachadh mm	Diamatir de armour wire mm	Outer-shMth Cruthachadh mm	Cir. Trastan de chabhlach mm	Max. DC a-mhuininn aig 20C(QAm)
4X1.5	7	0.7	1.0	0.80	1.8	15.7	12.1
4X2.5	7	0.7	1.0	0.80	1.8	16.8	7.41
4X4.0	7	0.7	1.0	0.80	1.8	18.1	4.61
4X6.0	7	0.7	1.0	1.25	1.8	20.3	3.08
4X10	7	0.7	1.0	1.25	1.8	22.1	1.83
4X16	7	0.7	1.0	1.60	1.8	25.2	1.15
4X25	7	0.9	1.0	1.60	1.8	29.1	0.727
4X35	7	0.9	1.0	1.60	1.9	31.5	0.524
4X50	7	1.0	1.0	1.60	2.0	35.5	0.387
4X70	12	1.1	12	2.00	2.2	40.4	0.268
4X95	15	1.1	12	2.00	2.3	45.1	0.193
4X120	18	1.2	1.4	2.50	2.5	50.2	0.153
4X150	18	1.4	1.4	2.50	2.6	54.6	0.124
4X185	30	1.6	1.4	2.50	2.8	59.7	0.0991
4X240	34	1.7	1.6	2.50	3.0	66.1	0.0754
4X300	34	1.8	1.6	2.50	3.2	71.8	0.0601
4X400	53	2.0	1.8	3.15	3.5	81.0	0.0470

cabhlachan 5 chòrd

Meud mM2	Iomhaill. Sreathan de chonduidir	Tromadh Cruthachadh mm	Bathais-sheath Cruthachadh mm	Diamatir de sìdear crìochnaich mtn	Sheath a-muigh Cruthachadh mm	Diametor thimcheall de chabtemm	Max. DC a' bualadh aig 20C(0Am)
5X1.5	7	0.7	1.0	0.80	1.8	16.6	12.1
5X2.5	7	0.7	1.0	0.80	1.8	17.8	7.41
5X4.0	7	0.7	1.0	1.25	1.8	20.1	4.61
5X6.0	7	0.7	1.0	125	1.8	21.6	3.08
5X10	7	0.7	1.0	125	1.8	23.6	1.83
5X16	7	0.7	1.0	1.60	1.8	27.0	1.15
5X25	7	0.9	1.0	1.60	1.8	31.8	0.727
5X35	7	0.9	1.0	1.60	1.9	34.7	0.524
5X50	7	1.0	1.0	2.00	2.1	39.8	0.387
5X70	12	1.1	12	2.00	2.3	44.0	0268
5X95	15	1.1	1.2	2.50	2.4	50.7	0.193
5X120	18	12	1.4	2.50	2.6	54.9	0.153
5X150	18	1.4	1.4	2.50	2.8	59.9	0.124
5X185	30	1.6	1.4	2.50	3.0	65.9	0.0991
5X240	34	1.7	1.6	2.50	3.2	72.4	0.0754
5X300	34	1.8	1.6	3.15	3.4	80.6	0.0601
5X400	53	2.0	1.8	3.15	3.8	90.2	0.0470

3+1 ioma-cridhe

Meud mM2	Mln. Sruthan de chonduidir	Tromadh Cruthachadh mm	innse	Diamatir de armour wire mm	Sheath a-muigh Cruthachadh mm	Cir. Trastan de chabhlach mm	Max. DC inneall aig 20c (Q/km)
3X2.5+1X1.5	7/7	0.7/0.7	1.0	0.80	1.8	16.5	7.41/12.1
3X4.0+1X2.5	7/7	0.7/0.7	1.0	0.80	1.8	17.8	4.61/7.41
3X6.0+1X4	7/7	0.7/0.7	1.0	1.25	1.8	20.0	3.08/4.61
3X10+1X6	7/7	07/0.7	1.0	125	1.8	21.7	1.83/3.08
3X16+1X10	7/7	0.7/0.7	1.0	1.25	1.8	23.9	1.15/1.83
3X25+1X16	7/7	0.9/0.7	1.0	1.60	1.8	28.1	0.727/1.15
3X35+1X16	7/7	0.9/0.7	1.0	1.60	1.8	29.8	0.524/0.727
3X50+1X25	7/7	1.0/0.9	1.0	1.60	1.9	34.0	0.387/0.727
3X70+1X35	12/7	1.1/0.9	1.2	2.00	2.1	38.8	0.268/0.524
3X95+1X50	15/12	1.1/1.0	1.2	2.00	2.2	43.2	0.193/0.387
3X120+1X70	18/12	1.2/1.1	1.2	2.00	2.4	46.8	0.153/0.268
3X150+1X70	18/12	1.4/1.1	1.4	2.50	2.5	52.6	0.124/0268
3X185+1X95	30/15	1.6/1.1	1.4	2.50	2.7	56.9	0.0991/0.193
3X240+1X120	34/18	1.7/1.2	1.6	2.50	2.9	63.2	0.0754/0.153
3X300+1X150	34/18	1.8/1.4	1.6	2.50	3.0	68.7	0.0991/0.193
3X400+1X185	53/30	2.0/1.6	1.6	3.15	33	79.0	0.0754/0.153

3+2 ioma-cridhe

Meud mM2	Mln. Sruthan de chonduidir	InsuiMton Cruthachadh mm	Bathais-sheath Cruthachadh mm	Diametor of armour wire mm	Outer-sbeath Cruthachadh mm	Cir. Trastan o! cable mm	Max. DC resistance aig 20C (a/km)
3X2.5+2X1.5	7/7	0.7/0.7	1.0	0.80	1.8	17.3	7.41/12.1
3X4.0+2X2.5	7/7	0.7/0.7	1.0	1.25	1.8	19.5	4.61/7.41
3X6.0+2X4	7/7	0.7/0.7	1.0	125	1.8	21.0	3.08/4.61
3X10+2X6	7/7	07/0.7	1.0	125	1.8	22.8	1.83/3.08
3X16+2X10	7/7	0.7/0.7	1.0	1.60	1.8	25.9	1.15/1.83
3X25+2X16	7/7	0.9/0.7	1.0	1.60	1.8	29.6	0.727/1.15
3X35+2X16	7/7	0.9/0.7	1.0	1.60	1.8	31.7	0.524/0.727
3X50+2X25	7/7	1.0/0.9	1.0	1.60	2.0	37.4	0.387/0.727
3X70+2X35	12/7	1.1/0.9	1.2	2.00	2.1	42.6	0.268/0.524
3X95+2X50	15/12	1.1/1.0	1.2	2.00	2.3	47.6	0.193/0.387
3X120+2X70	18/12	12/1.1	1.4	2.50	2.5	53.2	0.153/0.268
3X150+2X70	18/12	1.4/1.1	1.4	2.50	2.6	57.6	0.124/0.268
3X185+2X95	30/15	1.6/1.1	1.4	2.50	2.8	63.0	0.0991/0.193
3X240+2X120	34/18	1.7/1.2	1.6	2.50	3.0	69.7	0.0754/0.153
3X300+2X150	34/18	1.8/1.4	1.6	2.50	32	76.0	0.0601/0.124
3X400+2X185	53/30	2.0/1.6	1.8	3.15	3.5	86.5	0.0470/0.0991

4+1 cores cables

Meud mM2	Mln. Sruthan de conductor	Tromadh Cruthachadh mm	Innter^gaoth Cruthachadh mm	Diamatir de armour wire mm	Sheath a-muigh Cruthachadh mm	Cir. Trastan de chabhlach mm	Max. DC a-stàthadh aig 20C(0/km)
4X25+1X1.5	ann an	0.7/0.7	1.0	0.80	1.8	17.5	7.41/12.1
4X4.0+1X2.5	7/7	07/0.7	1.0	1.25	1.8	19.8	4.61/7.41
4X6.0+1X4	7/7	0.7/0.7	1.0	1.25	1.8	21.3	3.08/4.61
4X10+1X6	7/7	0.7/0.7	1.0	1.25	1.8	23.2	1.83/3.08
4X16+1X10	7Z7	0.7/0.7	1.0	1.60	1.8	26.4	1.15/1.83
4X25+1X16	7/7	0.9/0.7	1.0	1.60	1.8	30.9	0.727/1.15
4X35+1X16	7/7	0.9/0.7	1.0	1.60	1.9	33.3	0.524/0.727
4X50+1X25	7/7	1.0/0.9	1.2	2.00	2.1	38.8	0.387/0.727
4X70+1X35	12/7	1.1/0.9	1.2	2.00	22	42.8	0.268/0.524
4X95+1X50	15/12	1.1/1.0	1.2	2.00	2.4	47.8	0.193/0.387
4X120+1X70	18/12	1.2/1.1	1.4	2.50	2.5	53.2	0.153/0.268
4X150+1X70	18/12	1.4/1.1	1.4	2.50	2.7	57.8	0.124/0.268
4X185+1X95	30/15	1.6/1.1	1.6	2.50	2.9	63.6	0.0991/0.193
4X240+1X120	34/18	1.7/1.2	1.6	2.50	3.1	69.9	0.0754/0.153
4X300+1X150	34/18	1.8/1.4	1.6	3.15	3.3	77.5	0.0601/0.124
4X400+1X185	53/30	2.0/1.6	1.8	3.15	3.6	86.7	0.0470/0.0991